- RMS 1750 watts
- Dual 2 or 4 ohm voice coils
- Optimized for small ported enclosures
- Aluminum 2.25” voice coil former for superior heat dissipation
- High-temperature copper voice coil
- Double stitched surround
- Heavy-duty cast basket
- Spring-loaded terminals accept up to 8-gauge wire
- Stitched-on heavy-duty tinsel leads
- Solid pole with vent channels and aluminum shorting ring cap
- Rear gap-venting
- Top-Plate Cooling Channels
Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier “standard suspension” woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom, substantially thicker aluminum frame was designed specifically for the U Series, equipped with heat dissipation ribs. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is kept in check via a high-velocity solid pole / machined pole channels arrangement and a series of 16 direct air-gap vents in the back plate.
Specifications
| T/S SPECS |
UV.2 10" D2 |
UV.2 10" D4 |
| RE (Ohms) |
3.918 |
6.1962 |
| FS (Hz) |
49.9826 |
48.2463 |
| VAS (L) |
5.6312 |
6.1900 |
| Qes |
0.5327 |
0.6317 |
| Qms |
4.4138 |
4.5611 |
| Qts |
0.4753 |
0.5548 |
| Le (mH) |
3.1056 |
4.1634 |
| BL (NA) |
26.5116 |
29.7199 |
| Mms (Grams) |
304.2236 |
297.0392 |
| Cms (uM/N) |
33.3280 |
36.6351 |
| Sens (dB @ 1w/1m) |
82.9533 |
82.1635
|
Enclosure Specifications
| Sealed Enclosure |
0.5 cu ft |
| Ported Enclosure |
1.0 cu ft |
| Recommended Tuning |
35Hz |
| Recommended Port Area |
16 sq in |
| Displacement |
0.21 cu ft |
| Depth |
8.15″ |
| Outside Diameter |
11″ |
| Cut-Out |
9.75″ |
| Physical Dimensions |
Download |
