- RMS 1000 watts
- Dual 2 or 4 ohm voice coils
- Vented magnetic gap
- Aluminum 2.75” voice coil former for superior heat dissipation
- Innovative high-velocity vented frame spacer ring
- Large aluminum Faraday ring for smooth acoustic response
- Patented high-strength cast aluminum frame
- High-temperature voice coil wire
- Spring-loaded terminals
- Stitched-on double “XL” tinsel lead wires
This mighty 10-inch was a top-down improvement of its predecessor, which now delivers over 35mm of mechanical excursion. The 2.75” coil punches way above its weight, outperforming most 3” coils without adding weight. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust double-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone and a strong foam surround were used to complete this masterpiece.
Specifications
| RE (Ohms) |
3.90 |
6.82 |
| FS (Hz) |
37.0810 |
36.1409 |
| VAS (L) |
10.3683 |
12.3547 |
| Qes |
0.3598 |
0.3744 |
| Qms |
3.7041 |
3.5051 |
| Qts |
0.3280 |
0.3383 |
| Le (mH) |
3.5178 |
4.4560 |
| BL (NA) |
28.3634 |
31.5270 |
| Mms (Grams) |
318.8226 |
281.6632 |
| Cms (uM/N) |
57.7815 |
68.8513 |
| Sens (dB @ 1w/1m) |
83.42 |
83.67 |
| Xmax |
19mm |
19mm |
| T/S SPECS |
SAV2 10″ D2 |
SAV2 10″ D4 |
Enclosure Specifications
| Sealed Enclosure |
0.5 cu ft |
| Ported Enclosure |
1.0 cu ft |
| Recommended Tuning |
35Hz |
| Recommended Port Area |
15 sq in |
| Displacement |
|
| Depth |
6.92" |
| Outside Diameter |
10.94″ |
| Cut-Out |
9.17″ |
| Physical Dimensions |
Download |
