This is a used product that has been professionally rebuilt here at Sundown Audio. It comes with a non-doa warranty only. That means they are guaranteed to work when you receive it but no further warranty afterwards. Let us know within 24 hours of delivery if this product has an issue. We will not warranty any used subwoofer after that time. These potentially have scratches & scuffs on the magnets/motors and will not be in new condition.
- RMS 1000 watts
- Dual 2 or 4 ohm voice coils
- Vented magnetic gap
- Aluminum 2.75” voice coil former for superior heat dissipation
- Innovative high-velocity vented frame spacer ringLarge aluminum
- Faraday ring for smooth acoustic response
- Patented high-strength cast aluminum frame
- High-temperature voice coil wire
- Spring-loaded terminals
- Stitched-on double “XL” tinsel lead wires
This 12” SA v.2 is a top-down upgrade. The 2.75” coil punches way above its weight, outperforming most 3” coils without adding weight. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust double-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone and a strong foam surround were used to complete this masterpiece.
Specifications
RE (Ohms) | 3.91 | 6.35 |
FS (Hz) | 38.8866 | 33.6039 |
VAS (L) | 26.2867 | 28.0603 |
Qes | 0.5070 | 0.4996 |
Qms | 4.5133 | 4.0178 |
Qts | 0.4558 | 0.4443 |
Le (mH) | 3.1785 | 4.6357 |
BL (NA) | 21.9903 | 29.3900 |
Mms (Grams) | 256.5545 | 321.8425 |
Cms (uM/N) | 65.2922 | 69.6976 |
Sens (dB @ 1w/1m) | 86.59 | 85.03 |
Xmax | 19mm | 19mm |
T/S SPECS | SAV2 12″ D2 | SAV2 12″ D4 |
---|
Enclosure Specifications
Sealed Enclosure | 1.0 cu ft |
Ported Enclosure | 1.75 cu ft |
Recommended Tuning | 35Hz |
Recommended Port Area | 26 sq in |
Displacement | |
Depth | 7.35" |
Outside Diameter | 12.83″ |
Cut-Out | 11.01″ |
Physical Dimensions | Download |