LCS SERIES

LCS-12-001

Short product description to go here.

Coming soon!

Share on facebook
Share on google
Share on twitter
Share on pinterest
previous arrow
next arrow
PlayPause
Slider
T/S SPECS LCS12 D4
RE (Ohms) 6.9
FS (Hz) 33.442
VAS (L) 52.522
Qes 0.548
Qms 3.684
Qts 0.477
Le (mH) 3.15
BL (NA) 20.073
Mms (Grams) 152.328
Cms (uM/N) 14.869
Sens (dB @ 1w/1m) 87.4
ENCLOSURE SPECIFICATIONS
Sealed Enclosure 1.0 cu ft
Ported Enclosure 1.75 cu ft
Recommended Tuning 35Hz
Recommended Port Area 26 sq in
Displacement
Depth
Outside Diameter
Cut-Out
COMING SOON… Enclosure designs by

Since their introduction in 2017 the Sundown LCS series woofers have been known for their impressive bass response and high levels of dependability. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – these are all aspects that we have taken to the next level in the Sundown LCS series.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak). The large coil combined with gap venting, chamfered pole-piece design, and optimized pole vent give the LCS Series impressive thermal performance. Mechanical stability and durability are addressed via the strong paper cone, rugged foam surround, and a high quality spider with fully tied-on tinsel leads. All major areas of woofer durability have been addressed to the maximum level possible in this category.

Bottom-line; if you are looking for a great subwoofer option and you have a tight budget the Sundown LCS Series woofers are for you. These woofers have absolutely no frills – simply raw performance for the dollar.

Features & Technology:

  • Xmax = 14mm one-way by 70% BL
  • RMS Power = 300-watts
  • Vented magnetic gap
  • Vented Pole piece with chamfered edges for increased air powered voice coil cooling
  • Black Aluminum 2” voice coil former for superior heat dissipation
  • High Temperature 4-Layer copper voice coil wire
  • Spade Speaker Wire Terminals
  • Stitched-On Round Tinsel Leads to prevent fatigue and failure
  • High strength stamped steel frame
  • Optimized for small, ported enclosures

POWER THEM WITH ONE OF THESE AMPS

CHECK OUT THESE OTHER SUBS