E SERIES

E Series - Product

Short product description to go here.

Coming soon!

Share on facebook
Share on google
Share on twitter
Share on pinterest
previous arrow
next arrow
PlayPause
Slider
T/S SPECS Ev6 8″ D2 Ev6 8″ D4
RE (Ohms) 4.02 5.94
FS (Hz) 46.2269 45.5932
VAS (L) 5.8984 6.4189
Qes 0.5617 0.6170
Qms 6.1472 5.2248
Qts 0.5147 0.5518
Le (mH) 3.9549 5.3356
BL (NA) 15.2560 17.0644
Mms (Grams) 111.8455 105.6520
Cms (uM/N) 105.9518 115.3354
Sens (dB @ 1w/1m) 81.91 81.69
ENCLOSURE SPECIFICATIONS
Sealed Enclosure Not Recommended
Ported Enclosure 0.65 cu ft
Recommended Tuning 35Hz
Recommended Port Area 9 sq in
Displacement
Depth
Outside Diameter
Cut-Out
COMING SOON… Enclosure designs by

Thanks to our experience with 8” woofers dating back to 2008 the sixth generation E-8 offers levels of performance once reserved for significantly more expensive woofers. This driver is the result of over 10-years of research, testing, and data from prior versions. If you are looking for an 8″ driver to perform incredibly well at lower wattages (200-300 watts) in ported boxes at a great price the E-8 v.6 is exactly what you are looking for and is completely unmatched in its price class.
The E-8 v.6 is built around an upgraded version of the v.4/v.5 motor with superior gap venting. These proven parts are mated up to a strong, high clearance stamped steel frame and competition grade soft parts. The tinsel leads have been upgraded to the same 63-conductor “Mini-XL” units now found on the E-10/12/15 v.3 woofers. All new to the sixth generation E8 is a much more optimized surround to ensure more coil stability and higher cone area. Each part of the driver has been hand selected & tested to give you the ultimate in budget bass reproduction from a tiny ported enclosure. The sixth generation E-8 is far-and-away the best performing E-8 we have ever released.

• Features & Technology:
• Xmax = 14mm one-way by 70% BL
• RMS Power = 300-watts
• Vented magnetic gap
• Solid Pole piece with chamfered edges for increased air powered voice coil cooling
• Black Aluminum 2” voice coil former for superior heat dissipation
• High Temperature 4-Layer copper voice coil wire
• Spring Loaded Terminals
• Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
• High strength stamped steel frame

previous arrow
next arrow
PlayPause
Slider
T/S SPECS Ev3 10″ D2 Ev3 10″ D4
RE (Ohms) 4.0 6.1
FS (Hz) 32.2 33.5
VAS (L) 19.4 18.8
Qes 0.38 0.43
Qms 4.76 4.39
Qts 0.35 0.39
Le (mH) 2.55 3.59
BL (NA) 20.2 23.5
Mms (Grams) 192.0 183.7
Cms (uM/N) 0.13 0.12
Sens (dB @ 1w/1m) 84.2 84.0
ENCLOSURE SPECIFICATIONS
Sealed Enclosure Not Recommended
Ported Enclosure 1.0 cu ft
Recommended Tuning 35Hz
Recommended Port Area 15 sq in
Displacement 0.11 cu ft
Depth 5.625″
Outside Diameter 10″
Cut-Out 8.875″

Enclosure designs by…

Click above image for design info

The third version of our acclaimed E series is all new for 2016. Since we introduced the first E series in 2012 we have sought to push the limits of entry-level woofers forward. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – all of these bars have been raised once again for our third generation E series.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak before physical coil bottom). The E v.3 series has been upgraded to a full 2.5” diameter coil compared to the 2” coil of previous generations. The tinsel leads have been upgraded to a new “Mini-XL” lead containing 63-strands of conductor (a full XL is 84-strands and previous leads contained 42-strands) to help prevent potential failure due to amplifier clipping. The spider itself is a high-strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame.

The new stamped steel frame is also significantly stronger than previous generation E series woofers & features an enhanced “Sundown style” high pressure vented spider landing. Working in conjunction with a motor ventilation system based on our SA series & the new, larger voice coil the third generation E series possesses thermal capacity unheard of in this class of subwoofer.

Bottom-line; if you are looking for a great subwoofer option and do not want to break the bank the Sundown E-Series woofers are for you & these are the best E series made to date. They are ideal for anyone from beginners to seasoned professionals seeking industry leading performance at a value price point.

Features & Technology:
Xmax = 14mm one-way by 70% BL
RMS Power = 500-watts
Vented magnetic gap
Vented pole piece with optimized geometry
Black Aluminum 2.5” voice coil former for superior heat dissipation
High Temperature 4-Layer copper voice coil wire
Spring Loaded Terminals
Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
High strength stamped steel frame
Optimized for ported enclosures

previous arrow
next arrow
PlayPause
Slider
T/S SPECS Ev3 12″ D2 Ev3 12″ D4
RE (Ohms) 4.0 6.1
FS (Hz) 32.4 36.6
VAS (L) 38.5 30.8
Qes 0.41 0.53
Qms 3.90 4.58
Qts 0.37 0.47
Le (mH) 2.55 3.59
BL (NA) 21.4 24.4
Mms (Grams) 228.3 224.0
Cms (uM/N) 0.11 0.08
Sens (dB @ 1w/1m) 86.9 86.4
ENCLOSURE SPECIFICATIONS
Sealed Enclosure Not Recommended
Ported Enclosure 1.75 cu ft
Recommended Tuning 35Hz
Recommended Port Area 26 sq in
Displacement 0.12 cu ft
Depth 6.5″
Outside Diameter 12.25″
Cut-Out 11.125″

Enclosure designs by…

Click above image for design info

The third version of our acclaimed E series is all new for 2016. Since we introduced the first E series in 2012 we have sought to push the limits of entry-level woofers forward. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – all of these bars have been raised once again for our third generation E series.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak before physical coil bottom). The E v.3 series has been upgraded to a full 2.5” diameter coil compared to the 2” coil of previous generations. The tinsel leads have been upgraded to a new “Mini-XL” lead containing 63-strands of conductor (a full XL is 84-strands and previous leads contained 42-strands) to help prevent potential failure due to amplifier clipping. The spider itself is a high-strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame.

The new stamped steel frame is also significantly stronger than previous generation E series woofers & features an enhanced “Sundown style” high pressure vented spider landing. Working in conjunction with a motor ventilation system based on our SA series & the new, larger voice coil the third generation E series possesses thermal capacity unheard of in this class of subwoofer.

Bottom-line; if you are looking for a great subwoofer option and do not want to break the bank the Sundown E-Series woofers are for you & these are the best E series made to date. They are ideal for anyone from beginners to seasoned professionals seeking industry leading performance at a value price point.

Features & Technology:
Xmax = 14mm one-way by 70% BL
RMS Power = 500-watts
Vented magnetic gap
Vented pole piece with optimized geometry
Black Aluminum 2.5” voice coil former for superior heat dissipation
High Temperature 4-Layer copper voice coil wire
Spring Loaded Terminals
Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
High strength stamped steel frame
Optimized for ported enclosures

previous arrow
next arrow
PlayPause
Slider
T/S SPECS Ev3 15″ D2 Ev3 15″ D4
RE (Ohms) 4.0 6.1
FS (Hz) 32.2 31.3
VAS (L) 75.1 85.5
Qes 0.53 0.62
Qms 4.79 4.32
Qts 0.48 0.54
Le (mH) 2.55 3.59
BL (NA) 21.8 23.8
Mms (Grams) 312.9 291.5
Cms (uM/N) 0.08 0.09
Sens (dB @ 1w/1m) 88.6 88.1
ENCLOSURE SPECIFICATIONS
Sealed Enclosure Not Recommended
Ported Enclosure 3.0 cu ft
Recommended Tuning 35Hz
Recommended Port Area 44 sq in
Displacement 0.14 cu ft
Depth 7.25″
Outside Diameter 15.125″
Cut-Out 13.875″

Enclosure designs by…

Click above image for design info

The third version of our acclaimed E series is all new for 2016. Since we introduced the first E series in 2012 we have sought to push the limits of entry-level woofers forward. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – all of these bars have been raised once again for our third generation E series.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak before physical coil bottom). The E v.3 series has been upgraded to a full 2.5” diameter coil compared to the 2” coil of previous generations. The tinsel leads have been upgraded to a new “Mini-XL” lead containing 63-strands of conductor (a full XL is 84-strands and previous leads contained 42-strands) to help prevent potential failure due to amplifier clipping. The spider itself is a high-strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame.

The new stamped steel frame is also significantly stronger than previous generation E series woofers & features an enhanced “Sundown style” high pressure vented spider landing. Working in conjunction with a motor ventilation system based on our SA series & the new, larger voice coil the third generation E series possesses thermal capacity unheard of in this class of subwoofer.

Bottom-line; if you are looking for a great subwoofer option and do not want to break the bank the Sundown E-Series woofers are for you & these are the best E series made to date. They are ideal for anyone from beginners to seasoned professionals seeking industry leading performance at a value price point.

Features & Technology:
Xmax = 14mm one-way by 70% BL
RMS Power = 500-watts
Vented magnetic gap
Vented pole piece with optimized geometry
Black Aluminum 2.5” voice coil former for superior heat dissipation
High Temperature 4-Layer copper voice coil wire
Spring Loaded Terminals
Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
High strength stamped steel frame
Optimized for ported enclosures

POWER THEM WITH ONE OF THESE AMPS

CHECK OUT THESE OTHER SUBS